How To Turn On/Off Wireless Capability On Your Windows 7?

Wireless capability

Wireless capability on your Windows 7 is an inbuilt wireless management tool that integrates within your desktop. There are two widely used wireless capability types: Wi-Fi and Bluetooth. Wi-Fi capability is the technology used in Wireless Networking. If your device has a wireless card, it is compatible with your Wi-Fi. 

When the wireless card is on, your system is visible to your neighboring wireless networks. It builds an adapter automatically within your Windows Network and Sharing Center. But, if your wireless network freezes when you are working on your internet, it becomes a frustrating problem.

‘How to turn on wireless capability windows 7’ is the most sought-after query for anyone facing issues while working on their computer. This article may give you a clear view of “Why Windows 7 wireless capability turned off”. Let’s move on to explore!

8 Simple Fixes For Wireless Capability is Turned Off Windows 7

The error ‘Windows 7 wireless capability turned off’ takes place if the computer finds an externally disabled wireless adapter. Therefore, enabling the wireless adapter when running the Windows Network Diagnostics is essential. Many other reasons for wireless capability keeps turning off may be due to the following 

  • Faulty settings on BIOS
  • Disabled hardware button
  • Outdated drivers 

The problem may also arise when you update your OS (Operating System) or BIOS and install an update on your Windows. We have marked the simple ways to solve the wireless capability is turned off issue. 

Tip 1# Power Cycling on your device

The alternative way of turning on wireless capability windows 7 is to Power cycle your device. Power cycling is a method of turning your computer off and restarting again. The main reason is that the device might restart the configuration parameters and retrieve from a non-responding state of operation.

The network configurations refreshes you turn off your device. To power cycle, shut down your device correctly and remove all the connected wires from your device. You may also try to detach your device battery and plug-in after 2-3 minutes of hold. Consider detaching the battery to discharge the capacitors. Once you replace your device with the battery, inspect for the solution to the problem. 

Tip 2# Turn on Wireless capability by a physical switch

Laptops in recent times include a physical switch for allowing users to turn on wireless capability windows 7. The switch provides an easy way of accessing the wireless capability on your device. The hardware switch may turn off unknowingly, which causes an error message. Search for any buttons on the sides or below your screen and turn on when you find it.

Apart from the physical switches, there are other options to ease your work of turning on Wireless capability windows 7. The keyboard switch plays the same way as your physical switch. Press the Fn button (if present) on your keyboard, and this option may vary for different models of computers. Alternatively, you can reach out for the key on the keyboard, which symbolizes a wireless switch. Few models may have a touch feature on the screen’s bottom. Search for a wireless icon marked and tap it to turn on wireless capability. The standard shortcut to turn on wireless capability windows 7 is to press Fn + F2 keys on your keyboard.

Tip 3# Turning Wi-Fi On in Windows Mobility Center

Wi-Fi On in Windows Mobility Center

Windows Mobility Center unifies the information and all the settings of your device. Some of the settings are present in many desktop computers. The functionalities like the battery power plan, wireless options, and brightness control are in the mobility center. Possibly, your wireless capacity disables the Windows Mobility Center, which is the reason for the issue. To rectify the problem, go through the steps below.

Step 1: Click Windows + X, and choose the application from the list.

Step 2: Click the ‘Turn Wireless on’ button under the wireless option. 

Note: Some devices may not have this option, so we recommend to move on to the next possible solution to fix the issue.

Tip 4# Turning on Wi-Fi on Login Screen

Wi-Fi on Login Screen wireless capability

Another way to turn on wireless capability is to turn on your

at the login screen. This option is usually present when you turn your Windows on. Because if there is a fault in authentication, Windows can crawl on the internet and provide you with an alternative equivalent password you entered recently. You may also create a new account and check whether the wireless capability functions as expected. Check on the following steps.

Step 1: Restart your device and proceed further to the login screen.

Step 2: On the bottom right corner of the screen, search for the wireless adapter symbol icon. Click on it and turn on the Wi-Fi.

Step 3: Check if your Wi-Fi is working without any problem.

Tip 5# Modify the settings of Power Management 

Power Management turn on wireless capability

There is an option in Windows to turn off your devices when idle. It significantly saves power, conserves energy, and helps maximize your device’s battery life. But in some cases, disabling the power saver mode may also bring improvement to your wireless capability keeps turning off mess. The Wireless adapter requires only a minimal amount of power and may not cause any worries about it. Try out the below steps.

Step 1: Click Windows + R to launch the Run command. Type “devmgmt.msc” in the dialog box and then Enter. A window will appear that shows all the devices connected to your computer.

Step 2: Press’ Network adapters’ and search for the wireless adapter connected to your device. Right-click the Wi-Fi adapter and choose “Properties.”

Step 3: Choose the Power Management tab and clear the option ‘Allow the computer to turn off this device to save power.

Step 4: Click the “Ok” button to save those changes and then Exit. Restart your device after making these changes.

Tip 6# Utilize Windows Diagnosing

Windows Diagnosing for windows 7

If all the above solutions leave you deserted, try to use the “Diagnose” feature in your adapter settings. Windows might automatically find the wireless capability is turned off in your network adapter. It is simple but deserves a try, as many people find this feature helpful. To use the Diagnose feature, follow the below steps.

Step 1: Right-click on the ‘Network’ icon on the taskbar. Then choose, ‘Open Network and Sharing Center.

Step 2: Press ‘Change adapter settings’ on your window’s top-right corner.

Step 3: You may find the list of your device’s network adapters. Navigate to the ‘Wi-Fi‘ adapter and click ‘Diagnose this connection’ below the address bar. 

Step 4: Windows will automatically detect and fix your connection on the device. You need to restart the device to recheck whether the problem still exists.

Tip 7# Upgrade Network Drivers

Network Drivers for wireless capability

If your device drivers are not updated regularly, you may find wireless capability keeps turning off issue. The main force for driving a controlled network adapter is drivers, the primary controlling mechanism, while the network adapter is simple hardware. Windows can automatically update your drivers, but you must have a track on it. You can download the updates for your network drives on your manufacturer’s website and access them easily.

Step 1: Click Windows +R to launch the Run command. In the dialog box, type ‘devmgmt.msc’, then press ‘Enter.’ It takes you to your device manager.

Step 2: Choose Network adapters. Right-click your Wi-Fi device, and click ‘Update driver.

Step 3: A dialog box opens asking which way you want to ‘update’ your driver. Choose the second option: Browse my computer for driver software and proceed.

Press the downloaded driver file by clicking the browser button and then update it.

Step 4: After updating, restart your device and check if the connection works properly.

Tip 8# Renew your BIOS 

BIOS means Basic Input/ Output System, which is used to initialize hardware when your device is in the booting process. The BIOS is default on your device, and it is the first software that runs on your device when it starts up. Hence, it is like the key that starts all processes of your device.

The responsibility of BIOS is to test your hardware components on the PC and ensure that the workflows are proper without any issues. Mainly they are designed for working with a motherboard or a particular model. BIOS was initially written in ROM, and in the hardware that  replaces on a BIOS update. Today, BIOS is saved in flash memory to rewrite without changing the hardware. 

Updating BIOS is more technical, which is why it is the last possible solution for ‘turning on wireless capability windows 7’. Before updating your BIOS, ensure you are backing up your data altogether.

You can copy the BIOS file to a USB drive. Then reboot your device and enter the BIOS or the UEFI screen. You can choose the BIOS -update option and choose the BIOS file you located on your USB drive. By now, the BIOS has been updated to the new version.


This article comes up with all the 8 simple fixes on how to turn on wireless capability windows 7 . Also, this write-up gives you ideas that you can handle independently, and only the BIOS updating requires excellent concentration and focus as it is more technical. Thank us later, as this guide will find ways to overcome your wireless capability turned-off problems.